Máy Chiếu Panasonic PT-RZ34K

Thông Số Kỹ Thuật Máy Chiếu Panasonic PT-RZ34K

Model	PT-RZ34K
Projector type	3-Chip DLP™ projector
DLP™ chip
Panel size	24.4 mm (0.96 in) diagonal (16:10 aspect ratio)
Display method	DLP™ chip x 3, DLP™ projection system
Number of pixels	2,304,000 (1920 x 1200 pixels) x 3
Light source	Laser diodes (Blue LD, Red LD)
Light output	30,000 lm1/31,000 lm (Center)2
Time until light output declines to 50 %	20,000 hours (NORMAL)
Resolution	WUXGA (1920 x 1200 pixels)
Contrast ratio	20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)
Screen size (diagonal)	1.78–25.4 m (70–1,000 in), 1.78–15.24 m (70–600 in) with ET-D75LE8/ET-D3LET80, 3.05–15.24 m (120–600 in) with ET-D75LE95
Center-to-corner zone ratio	90%
Lens	Optional (no lens included with this model)
Lens shift (From the origin point of the lens mounter)
Vertical	±55 % (+78 %, +68 % with ET-D75LE95, ±48 % with ET-D3LEW200, ±44 % with ET-D75LE6/ET-D3LEW60) (powered)
Horizontal	±20 % (±15 % with ET-D75LE6/ET-D3LEW60/ET-D3LEW200, ±12 % with ET-D75LE95, +25 %, 0 % with ET-D3LEU100) (powered)
Keystone correction range	Vertical: ±45 ° (± 40 ° with ET-D75LE10/ET-D3LEW10/ET-D75LE20/ET-D3LES20, ±28 ° with ET-D75LE6/ET-D3LEW60, ±22 ° with ET-D75LE50/ET-D3LEW50, ±15 ° with ET-D3LEW200, ±8 ° with ET-D3LEU100, +5 ° with ET-D75LE95), Horizontal: ±40 ° (±15 ° with ET-D75LE50/ET-D3LEW50/ET-D75LE6/ET-D3LEW60, ±5 ° with ET-D3LEU100/ET-D3LEW200, 0 ° with ET-D75LE95) When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °.
Installation	Ceiling/floor, front/rear, free 360-degree installation
Terminals
SDI IN	BNC x 1: 3G/HD-SDI input
HAMI IN	HDMI x 1 (Deep Color, compatible with HDCP 2.2, 4K/60p signal input*5)
DVI-D IN	DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP) (Single-link only)
Multi Projector Sync IN	BNC x 1
Multi Projector Sync OUT	BNC x 1
Multi Projector Sync IN/ 3D Sync IN/OUT	BNC x 1
Multi Projector Sync OUT/ 3D Sync OUT	BNC x 1
Serial IN	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Serial OUT	D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Remote 1 IN	M3 stereo mini-jack x 1 for wired remote control
Remote 1 OUT	M3 stereo mini-jack x 1 for link control
Remote 2 IN	D-sub 9-pin (female) x 1 for external control (parallel)
Digital Link	RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input*5
LAN	RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
USB	USB connector (Type A) x 1 for optional Wireless Module (AJ-WM50 Series)/USB Memory Stick
DC OUT	USB Type A x 2 (for power supply, DC 5 V total of 2 A)
Expansion slot	SLOT (one terminal, vacant) for interface boards, SLOT NX compatible
Power supply	AC 200 V–240 V (Light output will decrease when using the projector with AC 100 V to AC 120 V)
Power consumption	TBD
Cabinet materials	Molded plastic
Operation noise	TBD
Dimensions (W x H x D)	Approx. 598 x 353 x 780 mm (23 17/32˝ x 13 29/32˝ x 30 23/32˝ ) (not including protruding parts)
Weight	70 kg (154 lbs) or less*7
Operating environment	Operating temperature: 0–45 °C (32–113 °F), operating humidity: TBD
Applicable software	Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Smart Projector Control for iOS/Android™

CÔNG TY CỔ PHẦN ĐẦU TƯ HCOM

Số 3, Ngách 70/2, Ngọc Khánh, Ba Đình, Hà Nội
Văn phòng – Hà Nội: Tầng 3 Tòa nhà 35, Ngõ 45, Trần Thái Tông, Cầu Giấy, Hà Nội
Văn phòng – TP Hồ Chí Minh: DP24, khu biệt thự song lập DragonParc 1, Nguyễn Hữu Thọ, Nhà Bè, TP. HCM
Hotline: 0904.589.255 – 0906.213.066
Email: hcom@hcom.vn